Motor power:1.5KW(Warranty:5 Years)
Shape size:1200*600*550mm
The material of frame case for main engine is stainless steel #304,and the main engine wheel is made of Cast steel.
Diameter:250mm

tighting wheel: reinforced nylon
diameter:240mm
TZ-8111 Travel switch, inner diameter of spring: 20mm
Outer diameter of slide bar: ɸ20*1030mm with rain cover

Full- automatic,the material of main frame: 304 stainless steel
Automatic control and manual control,Stop is controlled by sensor, including leakage protector, timing microcomputer and other necessary electrical components, and feeding by plug is controlled by type b electric control box

Full- automatic,the material of main frame: stainless steel #304
Automatic control and manual control,Stop is controlled by sensor, including leakage protector, timing microcomputer and other necessary electrical components, and feeding by plug is controlled by type C electric control box, automatic blanking

Full- automatic,the material of main frame:stainless steel #304
Automatic control and manual control,Stop is controlled by sensor, including leakage protector, timing microcomputer and other necessary electrical components, and feeding by plug is controlled by type D electric cabinet,automatic blanking, twist dragon extraction.

Full- automatic,the material of main frame: stainless steel #304
Automatic control and manual control,Stop is controlled by sensor, including leakage protector, timing microcomputer and other necessary electrical components, and feeding by plug is controlled by type E electric control box, twist dragon extraction

Work voltage:100-250V
Brand: DEVRE, imported and assembled in dosmetic,with quality guarantee

Work voltage:100-250V
Brand: DEVRE,imported and assembled in dosmetic,with quality guarantee

work voltage:90-250V
Imported from Israel

National-standard,Model:3*1.5,Used to connect Electric cabinet and main engine

Model: 2*0.5

Specification: ф20, used to protect electric wire, 4 meter/Piece

Specification: ф20

Specification: ф20

Specification: ф20

Specification: ф20

Common specification: 4*300,material:Nylon

Electrial insulation tape, used to connect the wire

Specificaiton:8*100,galvanized, used to fix electrical cabinet

60mm galvanized Tube,thickness of tube 1.5mm,thickness of galvanized coating 275g, Treatment of scraping welding slag for inner wall weld, which can avoid the broken of plug disc, reduce resistence,increase service life,easy to install by enlarging one end.

plug disc diameter ɸ44, material: Nylon 66,thickness 8.5mm, chain wire diameter: ɸ5, length of chain outer diameter :45mm
width:19mm,chain material :manganese steel, diameter of chain:ф5,length of inner diameter:35mm, width 9mm, plug disc center distance:70mm,the tension of transformation ＞1.2T, Breaking strength ＞3T

100 meters per chain,connected by joint between chains,material 40Cr,
Diamter: ф8

stainless steel #304. including 4 piece M8*16mm anti-off nut, 60-63 strong clamp (stainless steel #304) fixed.

Shape size: 345*345*105mm, with 60 galvanized tube,Pc material, inner wheel: reinforced nylon, the diameter of nylon wheel:230mm,stainless steel centre shaft,fixed by stainless steel screw,,weight: 2.96kg/Piece,mount materials: reinforce nylon,, the outer-shell with high strength,the hammer can not break it, transparent case is easy to find the feed blocking and dispose in time, outdoor protective cover for anti-aging, Warranty 5 years.

used to connect 60mm galvanized tube, stainless steel, the hose clamp is stainless steel #304 60-63 strong clamp

Model:Square, 8L
D60,8L, transparent with scale, match Zipper or lock

Specification: 60*3-1000mm, hot dipped galvanzied

Material:stainless steel #304, common model 52-76, used to fix dispenser

Material: Polypropylene

Model: 60,Red color, length 410mm. diameter of wide open-side: 152*127mm, inner diameter of below connect side,material polypropylene, weight：0.285KG/Set,color : Customerized

Stainless steel, with M6 anti-off nut, please make sure the size of crates

Maximum tensile: 1200n

Specification:0.55KW

Diameter:160mm*300mm

Specification:6m

Used to connect plastic steel wire and blanking motor

Specification:ф4, made of stainless steel #304

Specification:ф25*2.5mm ,6m/Piece, used to support main pipeline, generally cut into 2M/Piece, with bracket angle iron, single-U fixed feed pipe.

Stainless steel, with M6 anti-off nut, please make sure the size of crates.

Specification:40*40*4mm,6m/piece, used to make bracket for electrical motor and blanking motor and guide pulley

stainless steel #304 ,single-track, square

Diameter of silo:2.6 ton.
1820mm/2150mm/2750mm/3630mm
Thickness of upper vertebral plate: 1.5mm
Thickness of below verbetral plater :1.2mm
The thickness of coaming plater:1.0mm
Thickness of bracket:3.0mm
The thickness of staircase: 3.0mm.
The thickness of safety cage: 1.0
Thickness of galvanized coating:275g/㎡

stainless steel #304